Tie Dye Rubber Band Patterns. At this point you will have a rectangle shape. Afterward, fold in half horizontally.
Wrap the disc with three to six rubber bands in a crisscross overlap pattern which will give you six wedges or quadrants of fabric. Instead, we use zip ties which don’t disrupt the pattern and hold everything in place! While there are no fixed rules for tye dying, you can follow these tips and tricks to make amazing designs.
Cover Work Surface With Plastic Trash Bags Or Sheeting.
Fold the fabric in half again, then fold in half once more. Fold the fabric in half. Prepare shirts and gather tie dye supplies.
This Type Of String Is Cheap And Can Be Bought At Most Craft Stores.
Then, start folding the fabric along the line you made with the marker. Then, rinse the pants with cold water until the water runs clear and remove the rubber bands. Simply scrunch the socks up and tie the rubber bands around them randomly just to make sure it’s all held together.
Squeeze The Dye Along The Edges Of.
This makes the shirts take the dye in better. Squirt both sides of the disc and open the folds of the shirt here and there to make sure the dye is getting to the fabric in the middle of the shirt too. Tie tightly at the base with string or rubber bands.
Get The Fabric & Supplies You Need At Onlinefabricstore:
Cover work surface with plastic tablecloth. Tie them with rubber bands that are spaced about an inch apart from each other. Using 5 rubber bands, tie the sock together from toe to cuff, leaving an inch in between each band.
If You Don’t Want That Much White Space, You Can Opt To Use Thin Rubber Bands Or Tie Them A Bit More Loosely But Still Making Sure That It Holds The Craft Sticks Together.
Repeat the same on the bottom third. After that, you can unravel the fabric to reveal the pattern. Choose a different colored dye for each section between tied rubber bands, ensuring the dye is entirely absorbed through each pleating layer.
0 Comments