Diy Hovercraft Cd And Balloon. So we decided to try out the diy cd hovercraft. Hot glue to attach the sports drink cap to the top of.
This allows the hovercraft to stay slightly off the ground and move around freely, without rubbing on anything that might slow it down if you give it a push. The direction of the air from the balloon then forces the diy hovercraft to travel in the same direction. So we decided to try out the diy cd hovercraft.
But As Soon As The Air Runs Out, It Quickly Comes To A Stop.
Press the lid onto the cd. You can, if you prefer, take the balloon off the bottle top to blow it up. You can have a hot glue gun but if you don’t, do not worry, super glue will do a good job as well.
Sports Drink Cap Used To Make The Balloon Stay Attached To The Cd.
With just a few simple odds and ends from around the house, you can make your very own hovercraft. Place the cd hovercraft on a bench top and push it. Blow up the balloon through the hole in the bottle top.
Carefully Stretch The Neck Of The Balloon Around The Closed Sports Top So The Part You Drink Out Of Is Totally Covered.
Push the bottle top down onto the cd so that it sticks to the cd with no gaps for the air to escape. Variations that didn’t work for us {but it’s good to experiment} 1. Make sure the valve on your lid is snapped down, then attach the balloon to the valve.
Air Flows Out Of The Balloon, Through The Spool, And Under The Cd.
The air pressure is strong enough to float the weight of the hovercraft! That is the basic hovercraft made, yes it is that simple! Glue the cap over the hole in the cd.
Once Inflated, Place The Flat Side Of The Cd On A Smooth, Hard Surface And Let Go.
So we decided to try out the diy cd hovercraft. How to make the hovercraft work. Cd or dvd bottle plastic pop cap from a bottle of liquid dish soap balloon duct tape instructions:
0 Comments